| Alibre CAM products require an Alibre Design license to run. | ||||
|
Alibre CAM | Alibre CAM Standard |
Alibre CAM Professional |
Alibre CAM Expert |
| US Price | Bundled w/ Alibre Design Expert |
$1000 | $2000 | $4000 |
| 2 1/2 Axis Milling | ||||
| Profiling |  |
| | |
| V-Carving | | | | |
| Hole Milling | | | | |
| Thread Milling | | | | |
| Engraving | | | | |
| Facing | | | | |
| Pocketing | | | | |
| Re-Machining | | |||
| Advanced Pocketing | | |||
| Advanced Profiling | | |||
| Hole Making | ||||
| Drilling (includes Standard Drill, Deep Drill, Break Chip, Counter Sink) | |
| | |
| Hole Sorting | |
| | |
| User defined drilling cycles | |
| | |
| Automatic Hole Selection | | | | |
| Tapping | | | | |
| Boring | | | | |
| Reverse Boring | | | | |
| Post-Processors | ||||
| Click here to see a list of supported post-processors | ||||
| User customizable post-processor generator | |
| | |
| User Defined Cycles | |
| | |
| Arc Output | |
| | |
| Simulate Cycles | |
| | |
| Helix Output | | | | |
| Spiral Output | | | | |
| 5-Axis | | |||
| Toolpath Simulation | ||||
| Toolpath Animation | |
| | |
| Tool Holder Simulation | |
| | |
| Cut Material Simulation | | | | |
| Advanced Cut Material Simulation | | | ||
| Tool Holder Collision Detection | | | ||
| Part/Stock Comparison | | |||
| Tools | ||||
| Standard Mill Tools (Ball, Flat, Corner Radius) | |
| | |
| Standard Drill Tool | |
| | |
| Taper Mill, Thread Mill, Face Mill | | | | |
| Center Drill, Reamer, Tap Tool, Bore & Rev Bore Tools | | | | |
| Dove Tail, Lollipop & Form Tools | | |||
|
Alibre CAM | Alibre CAM Standard |
Alibre CAM Professional |
Alibre CAM Expert |
| US Price | Bundled w/ Alibre Design Expert |
$1000 | $2000 | $4000 |
| 4 Axis Milling | ||||
| 4-Axis Indexed Machining | | | ||
| 4-Axis Continuous Rotary Machining | | | ||
| 4-Axis Continuous Rotary Engraving | | | ||
| 4-Axis Parallel Roughing | | | ||
| 3 Axis Milling | ||||
| Horizontal Roughing | |
| | |
| Parallel Finishing | |
| | |
| Horizontal Finishing | | | | |
| Plunge Roughing | | |||
| Horizontal Re-roughing | | |||
| Plunge Re-roughing | | |||
| 3-Axis Pocketing | | |||
| Pencil Tracing, including Flat Mills | | |||
| Valley Re-machining | | |||
| Plateau Machining | | |||
| Steep Area Parallel Machining | | |||
| Steep Area Horizontal Machining | | |||
| Curve Machining | | |||
| Spiral Machining | | |||
| Radial Machining | | |||
| Between 2 Curves Machining | | |||
| Reverse Post Machining | | |||
| Horizontal Hill Machining | | |||
| 5 Axis Milling | ||||
| Indexing | | |||
| Toolpath Editing | ||||
| Toolpath Graphical Editing | | |||
| Toolpath Instancing | | |||
| Toolpath Arc Fitting | | |||
Order Alibre CAM by contacting a Sales Representative.