What's new
By:
A

AlbertafFlyer

Member 58
Joined
Last seen
Messages
34
Reaction score
2

Latest activity Postings About

    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      The reason I would like the bend lines in the DXF file (which I can't do because my version won't let me edit Harold's DXF file) is the...
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      I have V.28. Yes, I can open a 2D dxf, but I can't edit it. I just need a DXF drawing showing the bend lines so my laser guy can just...
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      This project is a one off... maybe two, if we screw up the first one. We are manually bending this on a hydraulic press by eye. I'm not...
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      Yes, I'm well aware of bend radius's and material differences when bending, but you do need a centre line when manually bending using an...
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      Thank you gentlemen for the help. Here is the corrected drawing. If someone could add bend centre lines it would be greatly appreciated.
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      This is great! One more favour... can you put a "Bend Line" at the center of the radius. I tried to edit the dxf to put one in at the...
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      Good to know... thank you!
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      Hmmm, as I mentioned earlier, I used the offset command to form the other part. Why do you suppose it would do that?
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      It's asking me to open the script menu?
      • Script.png
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      I'm running Atom and I don't think I can run scripts with this version.
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      Thanks for the tips. I'm fairly new to CAD and still learning. I didn't think the material thickness would matter as I'm only after the...
    • A
      AlbertafFlyer reacted to JimCad's post in the thread 3D to 2D with Like Like.
      Read through this thread and install the latest version. The download link is in the thread. I think this is exactly what you need...
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      Here's one of the items.
    • A
      AlbertafFlyer replied to the thread 3D to 2D.
      Thanks, unfortunately I don't have that option. I'm wondering if someone could help me out and convert a few drawings to a flat pattern...
    • A
      AlbertafFlyer posted the thread 3D to 2D in Using Alibre Design.
      Hi, I have Atom and I'm wondering if it's possible to get a 3D sheetmetal part into a 2D sketch? I need to get a piece laser cut and...
    Show older items
  • Loading…
  • Loading…
Back
Top