Recent content by AlexB

You maybe already aware of this, but a work-around could be to export the assembly as a SAT file, import that back into Alibre, then re-export as an IGES file. However, for some reason when I open the IGES file in Alibre it has parts missing, but not when I open it with another CAD program.

Can't see a way of just adding the mark first. But if you double click on the centermark, a box called 'CenterLine Properties' will appear where you can change the style from 'Lines' to 'Marks'. Saves you from the dragging lines method.

I press the shortcut key I use for the Measure Tool again ('M' for me).

This won't be perfectly accurate, but I 'fake it' by patterning one-turn helical cuts about the turn axis (only possible if it's radial) of the sweep. Keyshot does a pretty good job at covering the disjoints and seams: -

Am I missing something here? Can't you just click on the bend portion and then click on insert axis, to insert the bend axis? That's how I do it, or are you doing something more complex?

I can get the loft to not fail by making sure the two profile sketches do not coincide at the z-axis (maybe you've already tried that): - The vertical edge of one profile is offset from the axis by a tiny amount in the above image. Not exactly what you're after. Maybe it's something to do...

1920 x 1200 @ 100%

That's very smart, adding a temporary helical feature to create a spiral vertex to use as a reference line. Nice one, can use that technique on other problems.

Maybe replacing OK at the bottom of the dialog box with two buttons: 'Add' and 'Remove'? or 'OK-Add' and 'OK-Remove'. Less clicks, one dialog for each type of feature.

Anything that increases the amount of clicks I have to make to create features is a no from me. It looks like 'remove' is the secondary option (naturally), but there's a quite a lot parts I model that are 90% 'remove' features and only 10% 'add', so it will just result in more repetitive actions...

The <#> have been useful when I'm deleting entities from the list for features like fillet or sheet metal edges. It was hit and miss but still better than no unique identifiers at all. If you're going to implement visual cues/ highlights on the model when selecting entities, then I can't see a...

Nice, that's a useful feature I didn't know. However, while it worked by ctrl-dragging the node for circles, I needed to ctrl-drag the outer lines to move the constrained obround. Is this the case for you?

Is there a way to disable the surface splitting when exporting to Keyshot? The 'Rounded Edges' feature in Keyshot won't work if a model is split into seperate surfaces, at least for me.

Is this happening for anyone else? With the 'Threads' option on 'Texture' or 'Color' the internal faces of threaded holes can't be selected in the Measure Tool interface. The threaded hole faces can be selected on the 'None' option with no cosmetic threads visible.

1. Show all hidden components – a button or shortcut key, extremely useful for me. 2. Show part in explorer with click on model part – is currently a command in right button click menu, would be great if happens on click or even middle mouse button click. 3. Item in selection box indicated on...