Konradjustimagine
Senior Member 37
- Joined
- Last seen
- Messages
- 111
- Reaction score
- 39
Latest activity Postings Resources About
-
-
Konradjustimagine replied to the thread Bug on fillet and chamfer selection.Fantastic, thanks for the tip! -
Anyone else having this issue? Seems like the selection bugs out sometime and won't let you select things but if you select them in a...
-
That one was actually just for you ;) I remember hearing "Harold really wants this" at some point.
-
Konradjustimagine replied to the thread Flatten Sheetmetal: Imported Notched Cylinder.Thanks Harold. I was a bit perplexed that the complex geometry of the notch and miter transferred during the conversion but the angle...
-
Konradjustimagine reacted to HaroldL's post in the thread Flatten Sheetmetal: Imported Notched Cylinder with
Like.
Remove the angled end cut from the solid model and cut it after it is converted to sheet metal. -
Konradjustimagine replied to the thread Flatten Sheetmetal: Imported Notched Cylinder.Okay so I've fixed the little tab to be tangent and now it does import but now the angled end of the tube is being cropped off.
-
-
Konradjustimagine replied to the thread Flatten Sheetmetal: Imported Notched Cylinder.Hmm, well I haven't had luck with that. Here is the solid I was trying to convert. I've added a small flat extrusion within the seam...
-
Konradjustimagine replied to the thread Flatten Sheetmetal: Imported Notched Cylinder.Hey, thanks Harold. The information in that section of the help files doesn't really get into the nitty-gritty details about what...
-
I have entered one enhancement request relating to aligning views. I have no insight into where it might sit as regards priority.
-
Konradjustimagine replied to the thread Align views.What I like to do when I'm trying to line up unrelated views is: 1) Line up the view want with the existing one, directly on top of it...
-
-
Konradjustimagine replied to the thread Flatten Sheetmetal: Imported Notched Cylinder.Yes, exactly like that. Seems like a workflow problem for me. I very used to modelling all my parts inside an assembly as solids. I...
-
Konradjustimagine reacted to DavidJ's post in the thread Flatten Sheetmetal: Imported Notched Cylinder with Like.
Convert to sheet metal requires a valid tab - to work. The flat feature you have added isn't flattenable. Surely it would be simpler...
-
Konradjustimagine reacted to DavidJ's post in the thread Flatten Sheetmetal: Imported Notched Cylinder with Like.
Like this ?
-
Konradjustimagine replied to the thread Flatten Sheetmetal: Imported Notched Cylinder.I've realised the tab has to be tangent to the arc but still no luck
-
-
Konradjustimagine posted the thread Flatten Sheetmetal: Imported Notched Cylinder in Using Alibre Design.Hi Everyone, I have a question about importing a design into sheet metal and flattening it. I have a pipe with some notching and...
-
-
-
Loading…
-
Loading…
-
Loading…
