Stu3d's latest activity
-
Stu3d replied to the thread Sooo...What's this?.As a mainly hobby user I try and maximise my bang for buck when it comes to upgrades. I looked at the upgrade timing for the last few... -
Stu3d replied to the thread Trying to edit an imported step file.Here is a coupling nut I have modelled without visible threads. It probably needs the chamfer correcting as I guessed it and other...
-
Thanks! I didn't check all the cases. The concept is what I intended.
-
Stu3d replied to the thread Trying to edit an imported step file.When I altered dimensions D6 or D9 in your part it altered the distance between the two ends but I get the idea. I projected a sketch...
-
Stu3d replied to the thread Trying to edit an imported step file.I realise Booleans totally overkill for this simple part but doing things like this help me learn. I just altered the length of the...
-
Stu3d replied to the thread Trying to edit an imported step file.No problem
-
Stu3d replied to the thread Trying to edit an imported step file.I saved the step as an Alibre part then tried an extrude cut to remove one end, use Move Face to alter the length, Save As the part at...
-
-
Stu3d replied to the thread Random Builds and Wall Plates.This is a UK equivalent although we usually use a flex outlet with a hole in the bottom so the cable hangs neatly down the wall.
-
-
Stu3d replied to the thread Random Builds and Wall Plates.It seems to Shell perfectly or am I missing the point? David, I think it is similar to a light switch cover plate like MK grid range.
-
-
Stu3d replied to the thread [SOLVED]Need help importing dxf file in Alibre V27.Same issues, apart fom anything we know Alibre doesn't like complicated sketches and there is a lot going on in this one!
-
Stu3d replied to the thread [SOLVED]Need help importing dxf file in Alibre V27.Error when I tried to open it in Alibre.
-
-
Stu3d reacted to JimCad's post in the thread [SOLVED]Need help importing dxf file in Alibre V27 with
Like.
I think there's a Flatten command in Autocad to remove multiple lines and bring it all onto Z zero ? Can this be done prior to import? Jim -
Stu3d replied to the thread [SOLVED]Need help importing dxf file in Alibre V27.Would any of those processes remove duplicate sketch figures (overlaps?) and intersections? Edit: so overkill does that.
-
Stu3d reacted to NateLiquidGravity's post in the thread [SOLVED]Need help importing dxf file in Alibre V27 with Like.
@Stu3d FYI not all entire types get projected from one sketch to another, so it's possible blocks might go missing. Since I have...
-
Stu3d replied to the thread [SOLVED]Need help importing dxf file in Alibre V27.This is what I normally do but it is tedious even with a small sketch. Even if I was the original poster I wouldn't work through this...
