Search results

Thank you Harold. I checked for mirroring of the holes and that was not the problem. One hole on each side of XZ axis was used for the mirror. That was the only way I could get a correct mirroring of the holes. But I did do the regen all and that fixed everything. Thanks to all who tried to help.

Thanks, Harold your approach produced this error: com.alibre.design.ops.MateOperation+UnavailableTargetException: Target not available:com.alibre.acis.ACISEdgeAdapter at com.alibre.design.ops.MateTarget.getReferenceFigure(ProxyTargetToReferenceFigureStrategy targetToFigureStrategy) at...

This engine assembly is 80%complete. Just trying to bling it up a bit. The engine block has a series of 10 holes radial around the X axis. Each has to have a bushing installed. When I select the face of the bushing and then the face of the hole they are constrained together. My problem is when I...

Thank you albie and Harold. That fixed it.

I am working with copyrighted material here, so I will not post my files. You will just have to help me the best you can. I have two assemblies. A main assembly and a sub. Both assemblies have a rotating Shaft Central to the X axis. When both assemblies are opened as individual files, all...

In the screen shot below, the center marks the black box will not highlight when I try to draw a line to the center circle. The view is in sketch mode. The center circle will highlight. I don't recall having this problem in previous versions. Gary

Thanks David

I have this drawing with 2 views of the part. I'd like to delete one view without deleting the other. The help File says right click on the view, and hit delete, that will delete both of them.

This started to happen after the last update, not sure when that was. A month or so ago I tried to edit a sketch in a part file and Alibre immediately crashed. After a couple of more try's , I just deleted the sketch and redrew it. Today it's happened on 2 different part files. And I had to do...

Well I finally got the scripts to run after fixing two problems. This little script file: [CODE]Alibre Script build 347013 IronPython 2.7.10.0 Interactive Console For documentation visit http://docs.python.org/2.7 The complete standard library is available Console commands available...

This gear script will not since I've updated the the latest Alibre update. It has worked good previously. # Gear Generator Script # Used as a demonstration of how to create a custom utility # for use with Alibre Design Units.Current = UnitTypes.inch # default settings NumberofTeeth = 20...

Got v28 reinstalled today. Seems to be working fine.

Not yet

Installed v28 yesterday. Shut down computer last night because of thunder storms. This morning I get this error message: Can not load file or assembly 'DevExpress.Bonus Skins.v23.2. Verison=23.2.5.0. Culture=neutral. PulblicKeyToken=b88d1754d700e49a' or its dependencies. The module was expected...

The cord line of the airfoil is on the xy plane, so are the guide sketches.

I saw those gaps in the small end, but if you look at sketch 3 or 4, the end is snapped to the ends of the airfoil sketch. Or so it appears. Anyway, I think lofting on a center line may be a better solution. Thanks for looking.

This is a test run, not the finished part. I been working on this the last 3 evenings with no luck. I have followed this you tube Alibre Beginners Course #17 to the letter. (I think??). Sketch 1&2 will loft, but when you add a guide (sketch 3 or 4) it fails. darn if I can figure out why. Gary

Yep, that fixed it. Thank s fellows.

This gear case asm has a shaft that will rotate, until it is inserted into a larger asm. Now it's locked. I have searched this form and watched several Alibre video's for an answer. Why does it lock and how do I unlock it??? :mad:

I beleive I started in late 2021 with V24