What's new

Search results

  1. Konradjustimagine

    Splitting Solids? - **Solved**

    Hello David, Thanks for providing these solutions! I just tried using Option1 with great success and speed: Options 2 & 3 are similar in function to Harold's solution but go about it quite differently. Thanks so much for your help on this topic! It is amazing to see the creative and...
  2. Konradjustimagine

    Splitting Solids? - **Solved**

    Hello Harold, Thanks for the response. I like your reference geometry method quite a bit and can see myself using it for several applications provided the task is simple enough. I haven't utilized a SAVE AS workflow yet but I can really see some time saving opportunities from using one. It...
  3. Konradjustimagine

    Splitting Solids? - **Solved**

    Hello wsimonton, I tried your method, or at least attempted it. When I use the precise section view it seems like I can only divide the part from one side/one division. The images above used planes spaced 3/4" apart, the first slice is correct but the subsequent slices include too much of...
  4. Konradjustimagine

    Splitting Solids? - **Solved**

    Hello Everyone, I am working on a practice project and need some guidance. Basically, I am trying to fully model a part, then create layered slices of that part which can be laid out onto sheet-good materials for CNC routing. Intuitively, I want to create an array of planes spaced one...
  5. Konradjustimagine

    Possible to create collision-style constraints? **Solved**

    I found it. It was hiding in Offset constraints, which now thinking about it makes perfect sense. Oh the joys of learning new software. (edit: it seems I won't be able to constrain the pin due to conflicting/intersecting constraint rules) (What a mess) Thank you so much Harold! Its pretty...
  6. Konradjustimagine

    Possible to create collision-style constraints? **Solved**

    Oh boy.. well maybe I'm blind. I don't know where this function is in Design V24
  7. Konradjustimagine

    Possible to create collision-style constraints? **Solved**

    Found this: Was this ever implemented?
  8. Konradjustimagine

    Possible to create collision-style constraints? **Solved**

    Hello Everyone, I am working on a push/pull latch that operates with a track and pin. I am just wondering if it is possible to create some sort of constraint bounding-box type of affair that will keep the pin withing a pair of faces. From the research I've done so far this is looking like a...
  9. Konradjustimagine

    Using Counts within Formula? **Solved**

    Thanks for the link Ralf, very helpful information regarding int(x) functionality and its quirks. Knowing more about how Alibre handles this function will save much confusion down the road! Happy Holidays!
  10. Konradjustimagine

    Using Counts within Formula? **Solved**

    Thanks David, this is essentially what I meant in the original post about when I mentioned creating a new Global Parameter for this specific purpose. Too bad there isn't a simpler way to define a count values. Oh well. Happy holidays!
  11. Konradjustimagine

    Using Counts within Formula? **Solved**

    Hello Everyone, Happy New Year! Wishing everyone the very best for 2022! I am creating some formulas in a design I'm working on and I am having an issue adding a non-measurement (count) integer into my equation (They always get converted into an inch value). As an example...
  12. Konradjustimagine

    Open-Source CAM/Gcode/Tool-Path solutions compatible with Alibre for 3axis CNC Router?

    I did come across CamBam in the forums here. I looked at it prior to making this thread and I thought it was 2.5 axis software. Looking again after your post I see they say something about Waterline 3d operations. I also looked at the trial version of MeshCam that Alibre bundles with the...
  13. Konradjustimagine

    Open-Source CAM/Gcode/Tool-Path solutions compatible with Alibre for 3axis CNC Router?

    Hello everyone, I'm looking into some possible options for a 3axis CNC router setup compatible with Alibre exportable files and was hoping for some opinions and suggestions. My previous employer was using fusion360 to design and generate Gcode for their Mach3 CNC controller and in all it...
  14. Konradjustimagine

    Helix around a Torus? **Solved**

    This is great! Thank you! I haven't used 3d Sketchs at all up to this point so it took some trial and error to figure out how everything works but it does!
  15. Konradjustimagine

    Helix around a Torus? **Solved**

    Hello everyone, I've been working on some practice parts recently and just completed a simple hand-wheel with some ribs as part of a book binding press project: This part lead me to wonder how I might approach wrapping a Torus with some type of helical filament. Like this example I found...
  16. Konradjustimagine

    **Solved** - Naming New Parts while working within an Assembly

    Thank you so much Harold! This is exactly what I was hoping for!
  17. Konradjustimagine

    **Solved** - Naming New Parts while working within an Assembly

    Hello, Just wondering if there is a way to name a new part on its creation within an Assembly rather than during the Save Dialog afterwards. I keep wanting to create multiple new parts in an assembly but fear I wont remember which is which when the save dialog box pops up with new parts 1-10...
  18. Konradjustimagine

    Working with configurations

    Thanks didn't know that
  19. Konradjustimagine

    **Solved** -- Assembly Floats Above 'Ground'

    This completely fixed the issue! Thank you so much!
  20. Konradjustimagine

    Working with configurations

    Hello everyone! I have a questions about using Configurations with Global Parameters. (I tried looking at the help website but its down at the moment) For some context I've created a bookshelf; all parts and features within the design have been created from values and formulas based on my...
Top