alibre atom3d

Okay and So, I have printed three or four different prints after measuring the 5/32" holes on this motor plate. I am working in millimeter now for lack of correct sized bolts. I am close to 5mm bolts for these holes. It is a snug fit but works for now. When I measure with the calipers, I get...

Hello, I seem to be having trouble. I am sure there is another way to handle this selection. So, I used a revolve instead of extrusion of a circle. The revolve is basically an extrusion for a shape of a pen. I seem to not be able to make an interior thread in my revolve. Is there a way to...

Hello, As some of you know, I am currently testing EZ-Turn Express with Alibre integration. I can install files from .stp format from Alibre Atom3D into EZ-Turn Express. With that mentioned, are there any groups available now testing particular tutorials within the Alibre-EZ-Turn integration...

I have two tubular structures at 90 degress to each other and they intersect. Can anyone tell me how to trim the intersection? The geometry of the intersection is quite complex and I'm not sure how to do it. The forum search I did references tools that I don't have / can't find (Trim surface...

Hello There, Recently, I wanted to help this fellow with a wiring schematic in DWG format. Nothing too tedious. It is basically some lines with a text base portion. Anyway, when I attempt to alter the DWG in Sketch Mode it works. Then, all of a sudden before I can save, the Sketch Mode refuses...

Hey There, Me here. I am here. I listened to a small video online at the website, https://www.alibre.com/atom3d-training/ , and performed some other ideas and made a 3D Printed Bracket for a NEMA Motor... Not my best work or my worst. I measured, and yes it did take four tries, and performed...

Hello, That is what .stl file in MeshCAM looks like so far. I have been reading but... 1. How does one remove just the yellow part of the stock in the photo above? 2. I tried roughing and I tried parallel toolpaths but I am pretty sure the end result is not what I think will happen... Do I...

Hello, Me again...I was watching videos on making profiles and threads again: . That link is a Ex Machina Engineering video on Youtube.com... Okay, even though everyone has jumped in to support the cause, me-me-me here, does that video have specifics (options and particulars) that Alibre...

I can't open system options after installing alibre cam (freemill) even though now it's been removed the system options still can't be opened. I have also reinstalled the alibre software but it still can't be opened is there a solution?