What's new

equation editor

  1. Stuart

    Should Alibre Equation Editor have Min() and Max() functions?

    Referring to https://www.alibre.com/forum/index.php?threads/can-we-please-get-min-and-max-functions.24626/, would you like the Equation Editor to have Min(X,Y) and Max(X,Y) functions?
  2. Ex Machina

    How to fill an area with a honeycomb pattern

    After Harold made the comment in the thread on how to create an area fill pattern with an equation, I tried to develop a way to fill an area with a honeycomb pattern. In the end, I developed 2. Both are with some assumptions made. Take a look at the video and let me know what you think. Also...
  3. Ex Machina

    How to create an area fill pattern that parametrically fills an area and adjusts with it.

    In this tutorial you will see how to use one simple equation that can create a fill pattern. It works in Alibre although it should work on other Parametric CAD software as well. This equation is based on the parameters of the area you want to fill, such as the length, width, height, etc. The...
  4. idslk

    Spring with one tapered section

    Hello Colleagues, i've been asked some days ago by somebody how to make a spring with a tapered section on one end. The dimensions are regardsless. It should have an outer diameter from 6 mm, a wire of 1mm and a height of the cylindrical part of 25,5 mm for 14 revolutions. Starting at the one...
  5. HaroldL

    EquationDrivenDinRail 1.0

    This DIN rail part is equation driven to change its length and create a pattern of slots along the full length of the rail. It is millimeter based and all values are in millimeters. You can enter a length value in inches as long as you define it with either the double-quote ("), IN or INCH, in...