What's new

3D Printing Gallery

bigseb

Alibre Super User
wow, that would be big enough.
so scap the the idea of a fdm?
resin over fdm?
Depends what you want to do. Resins are getting pretty sophisticated now so most likely I would stick with resin.

FWIW people are now mixing resins to get the properties they want. Maybe something worth looking into.
 

bigseb

Alibre Super User
printed 2 halves with the hook slot, then glued the 2 halves togeather,
Did some threaded floating inserts some time ago. Also printed in two halves, put in the threaded insert and then solvent-welded the two halves together using acetone (printed in ABS).

20150619_150034.jpg

20150619_150100.jpg

20150625_094018.jpg
 

Ken226

Alibre Super User
Way Wipes for my lathe. Soft tpu wipes epoxied to pla bodies.





Handles for digital readout display.









PLA base for my homemade titanium/aluminum reloading powder trickler.


Tailstock parts tray and dial indicator adapter.








A wall mount caliper holder.



6.5 Creedmoor reloading blocks.

 
Last edited:

Ken226

Alibre Super User
I made another toolpost indicator holder today.

I use my edge tech toolpost indicator all the time to dial parts in my 4 jaw chuck, but till now have to use a magnetic base to indicate the face.

This one works for measuring the face of parts. I made the dovetailed part from a scrap of 316 stainless, and 3d printed the indicator mount.


IMG-20220912-165226331.jpgIMG-20220912-165350408.jpgIMG-20220912-165325733.jpgIMG-20220913-103621526.jpgIMG-20220913-103615271.jpgUntitled.jpg
 

Attachments

  • IMG-20220912-165245195.jpg
    IMG-20220912-165245195.jpg
    122.9 KB · Views: 32
Last edited:

kritoke

Member
Finally finished my first real 3D modeling project (I have done a few modifications or embossing of logos on stuff using Fusion 360, but couldn't get further than that before). Took about a weekend to get the initial design done, then a few hours over a week or two along with printing prototypes to get it the way I wanted to. I needed a way to get a cooling fan to be installed in a small computer tower for an AI/Render graphics card that has no cooling itself. Been running it for a week and a half with good success. I have posted it to Printables to get feedback and just to see if it is useful for anyone else. Tesla M40 Fan Blower Adapter
 

Attachments

  • Screenshot_20230107_121433.png
    Screenshot_20230107_121433.png
    102.5 KB · Views: 29
  • 20230107_222130118_iOS.jpg
    20230107_222130118_iOS.jpg
    2.2 MB · Views: 30
  • 20230107_183902369_iOS.png
    20230107_183902369_iOS.png
    151.5 KB · Views: 28

VoltsAndBolts

Senior Member
I installed a dash-cam in the wife's jeep some time ago and she didn’t like the cable hanging down. I made some of these clips to help with cable management. It was a success!JC-2 Full b.jpg20230211_152634.jpg20230211_144655.jpg
 
Top