What's new

Export to STL and start Slicer in one...

cadtec

Senior Member
Hi
We have developed a small tool for Alibre Design PRO and EXP that creates an STL, STEP, SAT, IGES or BIP from a loaded part in one pass and starts up to ten slicer programs simultaneously, automatically reading the STL-, STEP-, SAT-, IGES- or BIP-File in each slicer. This saves a lot of time...

STL-Exporter.jpg


V4.1.0 (15. January 2024)
- Expanded to reorder the list.
- New column to define the export type -> STL, STEP AP203, STEP AP214, SAT, IGES, BIP

V3.1.0 (03. March 2023)
- Expanded from 3 to 10 slicers
- New column for entering the printer name for the slicer. From time to time you don't know exactly which slicer goes with which 3D printer...


Download and instructions can be found here...
 

Attachments

  • STL-Slicer3.jpg
    STL-Slicer3.jpg
    70.7 KB · Views: 109
Last edited:

Oldbelt

Alibre Super User
You need to inform how the parameters for the produced STL file looks like
or is they defined inside your program by the same parameters as export STL from Alibre.
A user manual will be appropriate!.
 

BigKahunaFL

Member
SUCCESS!!! Well done, Sir!

EDIT… Oops! I just realized that you've already tested on Cura, which is the Mothership for Creality. Oh well, here's the setup that I test on.


AboutAlibre_20220714.jpg

AboutCrealitySlicer_20220714.jpg
 
Top