I used Assembly Boolean to create a single part of all of the parts in my assembly. This was nearly 4 years ago and I may have done something wrong. Now I would like to use that assembly again (all as separate parts) but it has disappeared. Is it possible to "unassemble" the .sat back into the separate parts? I though possibly the file just got misplaced or saved unintentionally somewhere else but have searched everywhere. The odd thing is that the 2D drawing of the assembly still opens and all parts are visible.
How to unassemble an Assembly Boolean
- Thread starter neelie2
- Start date
NateLiquidGravity
Alibre Super User
If the drawing still finds the assembly then you can either:
#1 Show Constituents for the drawing and see all the file paths and filenames associated with the drawing. https://help.alibre.com/articles/alibre-help-v27/2d-drawings-about-the-drawing-process-listing-the-constituents-of-an-assembly-or-2d-drawing
#2 Right click the view in the drawing and select "Edit 3D Model" then in the 3d model go into the file properties and see the file path and file name for that specific model.
#1 Show Constituents for the drawing and see all the file paths and filenames associated with the drawing. https://help.alibre.com/articles/alibre-help-v27/2d-drawings-about-the-drawing-process-listing-the-constituents-of-an-assembly-or-2d-drawing
#2 Right click the view in the drawing and select "Edit 3D Model" then in the 3d model go into the file properties and see the file path and file name for that specific model.