beefy's latest activity
-
Bbeefy replied to the thread Exactly what can be referenced in reference planes/axis/points..OK, took a lot of hunting to find the mouse/cursor symbol I get during sketching, when the cursor "sees" a line for instance. I've...
-
-
Bbeefy replied to the thread Exactly what can be referenced in reference planes/axis/points..Double and triple checked mine, and sketching does not see axis. Even when I go off the sketch plane and hover over the axis, it is not...
-
Bbeefy replied to the thread Exactly what can be referenced in reference planes/axis/points..Thanks David, learnt something there. What I've been trying to do is use the axis when creating the sketch entities, but when sketching...
-
Bbeefy replied to the thread Exactly what can be referenced in reference planes/axis/points..Thanks guys. Harold, my issue was not so much creating planes but wondering if they could be used in sketches. Example, I use Fusion at...
-
Bbeefy replied to the thread Exactly what can be referenced in reference planes/axis/points..Hi Dave, thanks for the info. Apart from just learning the software and what can be done (which for me is the more important part), it...
-
Bbeefy replied to the thread Exactly what can be referenced in reference planes/axis/points..UPDATE: I've just found out something. I never realised you can use Project to Sketch and use the axis to project sketch lines...
-
Bbeefy posted the thread Exactly what can be referenced in reference planes/axis/points. in Using Alibre Design.Alibre Expert v27 So I create a 100 x 100 square, extrude it 10mm and I have a flat square "slab". I insert 3 reference planes: 1st...
-
Bbeefy replied to the thread Constraint for came follower.Thanks Miles. I'd heard about the continuous rotation but thought I only had to keep the mouse pressed on the apply button.
-
Bbeefy replied to the thread Constraint for came follower.Awesome, thanks for the feedback. Feels good being able to help, after the help I've received. And thanks for the link, I'll see what I...
-
Bbeefy replied to the thread Constraint for came follower.Don't know if the following is of any help. I'm not exactly an advanced user and am normally the one asking for help. I looked up an...
