-
-
Joseph_L posted the thread Motion Simulation and FEA in Alibre? Join us live for a Giveaway! in General Discussion.Hello All! Tomorrow on our next Helpdesk Live! stream we will be showing SimWise with Alan Wegienka, President and Founder of Design... -
Joseph_L replied to the thread Preventing extrusions from merging.You can use surfacing to achieve multi-body like parts as well, if you have professional or expert. Here are examples, particularly the...
-
Joseph_L replied to the thread Parametric external and internal thread.I see what you're saying. You're doing cosmetic threads, and I believe you're right- it would be going to the external thread menu for...
-
Joseph_L replied to the thread Parametric external and internal thread.I'm guessing you're wanting a production thread and not a nominal thread? If so, you can define the thread by major minor and pitch...
-
Joseph_L replied to the thread I need help with a wrap.The simplest answer is that the pattern goes outside of the face of the part, making the wrap/project difficult to achieve.I'd suggest...
-
-
Joseph_L replied to the thread Defining the position of a slot.Thanks for the update Alodine. If widening the slot solved the problem, I'm wondering if that was a toolpath issue? I checked the...
-
Joseph_L replied to the thread CONTRACT DESIGN.This went out on the forum a little while ago. You can see if there is still an opening...
-
Here is the native file.
-
Joseph_L replied to the thread SKETCH FRUSTRATION.Hi there wazzu83, Thanks for asking this. I took a good look at this and I have a strong feeling that the behavior in the file you...
-
-
Joseph_L replied to the thread Defining the position of a slot.I seeing your part, but I'm unable to see what is undesirable, it seems to be working as expected. I turned my graphics way down and...
-
-
Joseph_L replied to the thread Happy 250 Years!.Thanks GIOV, and best wishes to you also!
-
Happy 250th anniversary to the entire Alibre team and to all users living in the U.S.!!!
-
Joseph_L replied to the thread Surface offsets.Yeah, surface offset is definitely on my personal short list. One way to do it is to do a 'thicken surface' command, thicken it to your...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
