Recent content by raygilbert

Hi, When creating a tapped hole, the thread, the hole depth and the drill depth are all specified in the dialogue. When the "hole callout" is added to the drawing the drill depth is missing and I have to add it manually. Can "hole callout" be modified to show both specified depths? Thanks Ray

Since upgrading to v2019, both new and existing drawings have changed the coloured company logo to greyscale. The drawing template has been in use for more than 3 years. It displays in mono on the screen and prints in mono on the colour printer, I cannot see any options to sort this. Thanks

On previous versions, when using ordinate dimensioning, it was possible to move an individual dimension out of line with the rest. This was handy in a cluttered drawing where the dimension text was overlapping. You could just grab the dimension and slide it out of line with the rest of the...

OK, have not used that before. Hope this upload works. I have also tried using a polyline to create the cam. The full cam surface and follower OD selected OK but no constraints are available to add a tangent constraint.

File attached It is possible to create a cam part (e.g. Large radius + small radius + 2 tangent lines) and a follower part (circular boss) then assemble them with constraints such that when the cam is rotated about the large radius the follower will move in a linear fashion? I can make the...

Thanks Ralph, I was looking in the wrong place - "part" file properties" not "drawing" file properties.

I Have just moved from AD 12 to Geomagic design 2015.1.1 . No vault is installed The first/third angle projection properties has disappeared form the file properties window -where has it gone. I will be back as I cannot find many things which were always on screen in AD Still trying to find...

Thanks Miles, Never though that keeping my start folder tidy would have caused a problem. Moved the Alibre directory back to the root of the start folder and Alibre is happy again. Much appreciated.

I upgraded to 2011 yesterday. Made some parts and some drawings and all was well. Today when I tried to start it, a window appeared to say that it could not find AlibreDesign.msi I has to use task manger to get out of the loop. The temp .msi file is no longer available I re installed and it...

Good tip Josef, Flashfolder installed. Blood-pressure back to normal :) Ray

Thanks for your replies. Well that is disappointing. I have just checked 5 of my old CAD programmes and 3 CAM programmes and they all, without exception, have an option to set default file paths for drawings, parts, symbols, tools, postprocessores, exporting etc. Adding shorcuts to every...

I am using v11.1 and cannot find a way to set default drawing directories in WinXP . It is getting quite annoying having to continually look for my drawing folder. The default folder becomes the folder I last saved to or exported to even if that is a USB Stick, external drive or where I store my...

Thanks Harold.

I cannot get this fillet to propagate around the bottom of the cavity. Is there some error in my drawing? TIA Ray

Thanks Mike, I think I will just stick with adding extra tabs at the corners since there is not a more elegant solution. Ray