simonb65's latest activity
-
Exactly - none of us have a monopoly on being 'correct'. Preferring the rectangle by centre to not be initially fixed... -
You know there are is another option, Rectangle by Three Corners. Like the rectangle by center it only has Perpendicular constraints...
-
simonb65 replied to the thread Why is this not fully constrained?.Because not every rectangle or square sits parallel to an axis. You might want to rotate it, so this gives you the option by either...
-
It probably needs a horizontal or vertical constraint on one of the lines.
-
Usually the best way to see what's wrong is to grab a node and try to drag it.
-
simonb65 replied to the thread How to extend lines in 2D drawing.Theoretical Intersections is what you need. Take a look at ... https://www.alibre.com/forum/index.php?threads/dimension-to-t-s-c.23977/...
-
simonb65 replied to the thread Alibre drawing Window FROZEN with big red X on top.You need to report that to support. Technically, from a programming POV, the red cross is the default low level windows drawing render...
-
No problem. Although I don't fully understand most of your posts it certainly sounds like you're excited about this new program and its...
-
simonb65 reacted to DavidJ's post in the thread Transformation matrix has scaling that doesn't match the STEP file. with
Like.
Please tread carefully - a response which is not relevant to the original question might be confusing and hence create extra difficulty... -
simonb65 reacted to NateLiquidGravity's post in the thread Update changed part in an assembly with Like.
I've started creating package files of my assemblies as backups.
-
Simplest answer is Save All As - though there can be some aspects to be aware of. After saving all the (linked) files to a new location...
-
simonb65 replied to the thread Update changed part in an assembly.This ^
-
simonb65 replied to the thread Update changed part in an assembly.If your only making a 'backup' copy on your server that gets 'restored' back to the same location on your working machine, then that is...
-
simonb65 replied to the thread Update changed part in an assembly.3. is very problematic if you decide to edit any of the parts and really not recommended! I would only do this for viewing assemblies...
-
simonb65 replied to the thread Update changed part in an assembly.I think this has been discussed a while ago, i.e. lock the parts like Microsoft office locks excel, word files, etc (and become read...