Search results

From V(whatever) I have been having problems with items in the Design Explorer with items in the side bar jumping around erratically as I work with it - certainly not a show stopper but very annoying and can result in design errors. Has anybody else experienced this? I suspect it is a dwell...

I believe this problem has a MicroSoft Windws 7 route cause - probably something in am upgrade has triggered the problem. I have been using Geomagic Design/Alibre for 10 years and using "Save As" almost daily until a couple of weeks ago when it stopped working. I have been told that "Save As"...

Has anyone else had a problem with "Save As"?

I struggled with this years ago before quickly concluding that it is easier to model a library of fasteners yourself. Have a each style of fastener a separate "Part" (Hexhead, Sockethead, Countersunk, Buttonhead, whatever). The GMD "Configurations" is ideal for defining different sizes with a...

Here is Jack - he come in 3 sizes. Jack can be manipulate to any position.

Hi ? I have done the sort of thing you are looking for recently. Open a Drawing, inset a .jpg and trace around it with a spline . Copy the the trace (Select followed by Ctrl C) and Paste (Ctrl V) into a Part sketch plane. Extrude or or cut the Sketch.

Thanks David, This is certainly not a design for a brake press on its own. It can be made with a brake press and rolling with appropriate tooling from a single sheet (punched or laser cut) as our current conveyors are designed. We are having to replace our hundreds of existing conveyor frame...

Is there a way of adding a Flange to a Bend (as in the frame walls of a conveyor) in GM and then produce a flat drawing for laser cutting? Is it possible with other packages - SW, Inventor and so on?

Thanks Andrew, This weird as both my arcs were Project to Sketch!!

Why does Extrude Cut (Extrude 11) not work?

I thought I could write on a Bend (700 X 1,000 X 1,000mm radius with Unbend, Extrude Cut the Sketch of the characters and then Rebend. I have tried this but it is not working. I believe that I have done this before but can't find the model. Am I missing something?

Thanks David - I was missing something.

I previous version, when you Suppressed a Part in an Assembly the Part was greyed out and Constraints removed in Design Explorer. You could restore the Part and Constraints by Unsuppressing the Part. In V2014 the part is removed in Design Explorer and cannot be restored - it is equivalent to...

Hi ??? I opened the SW Part with GM and converted it to SM - all good except the the top flaps did not convert. However the converted file cannot be edited as it has no "history" as is the case with converting parts from one package to another. I don't believe that there are any short cuts -...

There is no word from the Mothership on this topic that is so important to much of the the loyal user base. I am fighting to have Alibre/Geomagic accepted as the modeling program ahead of SW in the largest producer of ice cream in Australia. The lack of of response on this topic from the the...

That the the name "Geomagic" is a problem to the owners of the licenses who depend on the product for their work and incomer is well established. That the management of Geomagic Design have not responded to these concerns is very disappointing. Those most concerned about the name are the users...

The Geomagic name has been a smaller problem to me than Steve as my clients are internal. When I saw the name Geomagic my first thought was Disney Studios. I have had to spend some time explaining the the story - Alibre - 3D Systems - Ping Fu - Geomagic to my colleagues. Despite all the good...

Me also. The "Check In" prompt is a significant improvement but an option for "Automatic Check In" would finish this issue for ever.

I agree - Catalog Features and having parts saved as Symmetric Rectangles is more work than using the the Rectangle by 2 Points tool and then applying the Symmetric Constraints tool. We need a need a Symmetric Rectangle option in the Rectangle tool menu - this would center a rectangle about the...