Create part from data file txt.

[Oldbelt]

Can any body help with this .
running the .py code with the txt file, gives an error reading the firs text line
Ican't se whatis wrong

 

[idslk]

Hm, got only one fail:

which was :


Regards
Stefan

 

[Oldbelt]

Thank you for your instant respons.
I fixed the false indent and run again, with the same error as before.

I can't understand why invalid syntax , it looks straight forward.
Stefan do you have a hint?

 

[idslk]

Stefan do you have a hint?

this will occur if you have "loaded" the text file into the AlibreScript Editor window and try to run it...

Regards
Stefan

 

[Oldbelt]

Thank you Stefan i have forgotten how to use a SW I have written myself, for several year ago.
I was made for the surfguy's, the wanted to design there own fins for there boards
Funny ide, the supplier know how to do it.
They just need to make a outline sketch at "grid" paper. and set the dimensions.
Then input those to a little SW I have made.

The output is the TXT files you have seen. The profiles is from Airfoil arkive. I then make a STL of the generated part, the surf guys can have and fiddle around with at there 3D printers.
Thank you for the help.

 

[GIOV]

Hi Stefan,
Please attach the corrected script.
Thanks in advance,
GIOV

 

[GIOV]

No worry,
I ran it

 

[GIOV]

Hi Oldbelt,
You do a wonderful Part. Only I saw that the Airfoils Profiles aren't so accurate. May be you are able correct this spline with Stefan 3D points Script.

 

[Oldbelt]

Hi GIOV.
The profil text file was a file was one i picked among a lot of files,
you know when you write a SW you make a lot of test and forget to delete them.
I send you a real txt file with a symmerical profile, taken fra the "Airfoil" archive.

 

[GIOV]

You right,
The accuracy is better now.


Thanks!!!

 

[GIOV]

Hi Oldbelt,
I ear that SW has a add-on called Surface Works (MultiSurf) of aeroHydro). Do you know about?
Is it feasible have a Pilot 3D (ProSurf) of New Wave as add-on in Alibre?
Thanks in advance.