RocketNut
Alibre Super User
Salutations
Why does the outer shell splinting? What I am talking about is when a layer does not adhere to the previous layer, causing a gap (warping) between layers on the shell. This is not warping from the build table but after several (>200) layers has been printed. Like on one model was 128mm an another was only about 55mm tall when the warp happened. This warping seems to be random. Also as more layers are added the gap seems to grow. On one model this warp happen twice about 100mm apart! :shock: I have seen this with PLA,Nylon an ABS filament.
Any clues on why this is happening?
Rocket Nut
Why does the outer shell splinting? What I am talking about is when a layer does not adhere to the previous layer, causing a gap (warping) between layers on the shell. This is not warping from the build table but after several (>200) layers has been printed. Like on one model was 128mm an another was only about 55mm tall when the warp happened. This warping seems to be random. Also as more layers are added the gap seems to grow. On one model this warp happen twice about 100mm apart! :shock: I have seen this with PLA,Nylon an ABS filament.
Any clues on why this is happening?
Rocket Nut