Sketch part of a circle.......rusty user

[dkmc]

I'm not a full time user, just occasionally. If I ever knew how to sketch something like this, the knowledge is forgotten. Could someone give me some clues?
(The part with the segments of a circle) The OD on the one on the right is aprox. 5"
TIA

 

[Ken226]

There are alot of ways that shape could be sketched. The first thought that comes to mind for me is to start with some concentric circles, and an X:



Then use the trim button to trim out the un-needed line figures:



Extrude boss, and fillet as needed:

 

[Ken226]

An example of a similar part:

 

[dkmc]

Ken, thank you so much for your reply. That example appears to be an exact image of the parts I am dealing with. What a coincidence.

 

[Ken226]

Ken, thank you so much for your reply. That example appears to be an exact image of the parts I am dealing with. What a coincidence.

Not a coincidence. I created the model and provided the ad_prt file as an example, to show the workflow used to create it.

I just remembered that I'm using the v27 beta, so unfortunately unless you are as well, you won't be able to open it. Apologies.

 

[dkmc]

Not that matters, the feature is only a 3/16 plate welded to the end of a tube. The assemble is a weldment.
Thank you again...