Bazzer
- Messages
- 93
- Reaction score
- 55
Latest activity Postings About
-
-
Bazzer replied to the thread 3D Printing Gallery.Jim I am glad you noticed the bolt, there is another video where it vibrates off. That stand is a rickety old Workmate B. -
Bazzer replied to the thread 3D Printing Gallery.The bore is 21mm and the stroke is 18.95mm, power on a good run is north of 4.5 BHP at around 32,000 to 33,000, that run in the video...
-
Bazzer replied to the thread 3D Printing Gallery.Jim Here is a link to the 3D printed crankcase running. Around 32,500 rpm and a little rich for this test run.
-
Bazzer replied to the thread 3D Printing Gallery.The upswept wing tips are 3D printed, the model flies at around 130 mph. The fuselage pattern in yellow is made in sections and then...
-
-
Bazzer replied to the thread 3D Printing Gallery.Many 3D print projects here, all modelled in Alibre. The engine crankcase is 3D printed aluminium and works well, I also done a resin...
-
-
As a means to reduce costs we're looking into creating our own tooling in-house, mostly likely to also change the specs to whatever we...
-
Bazzer replied to the thread How to Use Lew's Spreadsheet Driven Library Parts.Can you not track Lew down? He is on Grabcad, Lew is an easy guy to deal with IMO.
-
Bazzer replied to the thread Looking For An Adhesive.I doubt an adhesive would work, what you need to do is have a sleeve inside the 3D printed part to act as an insulator, so larger bore...
-
Bazzer replied to the thread Which CAM?.I have looked at the VMC 190 manual, the machine has a usable set of G codes, nothing fancy but will support your 2.5D aspirations. I...
-
Bazzer replied to the thread Which CAM?.Did you try the Swiss SimplexCAM? the guys at CADTEC give support on the Alibre forum and it is fairly reasonably priced with no catches...
-
-
Bazzer replied to the thread Which CAM?.Generally speaking the post processors are easy to modify to get exactly what format of code that you want out of the post. In fact I...
-
Bazzer reacted to bigseb's post in the thread Machines that are Tiny and Building More Machines doing "Bigger" Things... with
Like.
Single flute cutters are great, especially when using smaller diameters. We use the aluminium cutters because a) we have them and b)... -
Bazzer reacted to silver2row's post in the thread Machines that are Tiny and Building More Machines doing "Bigger" Things... with Like.
I have V-bits only outside of single flute endmills. I will think about investing in these endmills soon. I think my worry at first was...
-
Bazzer replied to the thread Machines that are Tiny and Building More Machines doing "Bigger" Things....And the faster it will wear out the tools.
-
Bazzer reacted to JimCad's post in the thread Space Mouse was discussed in the live stream 10th April with Like.
Just noticed that my signature says "Super user" Ignore that. It comes from the number of posts I think. I'm not a Super user...
-
-
Loading…
-
Loading…
