Alibre Design V27 - Service Update 1

[HKOCH]

New Servcie Update just release v27, Service Update 1.

 

[RocketNut]

I do not see the update!!!

 

[BigKahunaFL]

I do not see the update!!!

Nor do I…
… but that's because I've already installed the update <g>!

BTW @RocketNut, I think you forgot to change your signature, otherwise, you would've seen an available update (just sayin')…

 

[DavidJ]

Build 27039 was released several days back.

Check update settings in Alibre if you don't already have build 27039, and it isn't being flagged up. If necessary there is a manual check, or you can just download the installer from the Alibre web site.

 

[JimCad]

I had a notification and did mine a few days ago.
Installed side by side first then removed the old one after a quick check that all was OK.

Jim

 

[graveler]

I do have installed the v27.0.1 (27039 build), but I did have time to design new parts (or update some others) with the initial v27.0.0 (27038) version.

Be warned to spend some time redesigning thoses parts saved/updated with the v27.0.0.

Although the SP1 update summary seems to relate to assembly constraints, when I open a standalone part, it shows up initially good but as soon as I switch configuration or simply regenerate the whole part, most of the features seem to lose references to surfaces or lines.

I did reinstall v26 alongside but as I feared it, a nice popup told me that the file can't be opened with version prior to 27038 (which seems unavailable to download).

 

[NateLiquidGravity]

Contact support with the files so they can test.