DDoerschuk
Member
Editing a part doesn't update a drawing of the part?
In Alibre v10, SP1, when I edit a part that has previously had a drawing created, the edits made to the part never get updated in the drawing. I was under the impression that this was done automatically, but I certainly could be wrong. The sequence of events is:
1. Make a part, then close the part file.
2. Create a drawing of the part, then close the drawing file.
3. Open the part, and make edits.
4. Save and close the part file.
5. Open the drawing. The edits made in (3) above are not reflected in the drawing.
Thanks for the help!
Dave
In Alibre v10, SP1, when I edit a part that has previously had a drawing created, the edits made to the part never get updated in the drawing. I was under the impression that this was done automatically, but I certainly could be wrong. The sequence of events is:
1. Make a part, then close the part file.
2. Create a drawing of the part, then close the drawing file.
3. Open the part, and make edits.
4. Save and close the part file.
5. Open the drawing. The edits made in (3) above are not reflected in the drawing.
Thanks for the help!
Dave