Re:
gregmilliken said:
...although you can export STEP and get the geometry back without features. Not such a great option I know, but it is one path back.
I tried to do this and I received this message...
Warning-File Version is Unsupported...com.alibre.rose.RoseException: imported file version: 9,0,0,9238 is higher than current Alibre version: 8,2,0,9072...File was not imported due to errors.
I was somewhat successful by opening up the .stp files of an 8.2 and 9.0 export where...
The third line from the end of the file in 8.2 contains this text...
#67902=SCHEMAVERSION('PRODUCTVERSION 8,2,0,9072','ROSEUtils.dll [Version: 8.0.0.1019]');
The third line from the end of the file in 9.0 contains this text...
#5567=SCHEMAVERSION('PRODUCTVERSION 9,0,0,9238','ROSEUtils.dll [Version: 9.0.0.1022]');
I did a copy and paste of the version numbers and was able to import the file back into 8.2 [a loft with 17 sketches on 17 different planes] except the planes were all stacked up on top of the xy plane...ie they had lost their z coordinates.
By editing each plane I was able to get the model back in place...which was easier than redrawing the 17 sketches.
Good luck...
Steve