Search results

My bad, that IDR was from my first attempt to extrude out my part but it didn't give me the result I wanted so I deleted the extrusion assuming all associations would go away with the deletion. I was wrong.

Ok, now I'm pissed.... I can somewhat understand (or maybe more accurately accept) having to rub my belly and pat my head to get some of these constraints to work but after again having my little coupon seize up on me after throwing more constraints at it (I did originally have some success...

Although I believe I am methodically and logically adding planes and axis's one upon another as well as following up with constraining parts to said constraints in similar fashion I must be breaking some cardinal rules on how to create planes and axis's or adding constraints to parts. Maybe a...

Trying to create an assembly for a fire pit gazebo using 6 x 6 posts and have started off creating a lot of planes and axis's so I can use the geometry of the assembly to bound parts and get compound cutting angles. Not working out of the box. First off, my attempt to first create a part within...

Downloaded it and it looks great! Thanks!

I'm referring to the Engine model Alibre originally had as a downloadable teaching aide as a constraint exercise, maybe is it still available and accessible in V21? I happen to be making a bracket for a chevy 350 engine to run an accessory off the front crank pulley and was thinking that...

Took 2 times inserting the file into the folder but it worked on the 2nd try, thanks!

Albie, I placed your file in the location but was unable to locate the new threads in my insert hole command nor was I able to figure out how to specifically select to look at the custom thd file rather than the default. Should I rename the custom file with the default file name after archiving...

Yep Lew, I'm running Expert 2017.1.2 64 Bit. I'll try Albie's suggestion and see if that's successful

...I don't have a NPT selection on my INSERT HOLE command? All it shows are: UNC UNF UNEF UNS Metric Course Metric Fine

I have an assembly that I am having a problem mirroring one of the sub assemblies. I get a window popping up saying an "Unexpected Error" has occurred. I am not seeing why I'm having a problem because I already have another mirrored sub-assembly within my main assembly that worked fine. I...

Google drive link to uploaded package https://drive.google.com/open?id=15YX3k-G2YlZgvgaerE80EWTV7jB9QFqt

I probably have to upload a package rather than the above assembly that is linked to several locations in my file system but I get the error message that the package I've created is too large. It shows to be just over 6MB.

I have a detail that I have to create a cut profile to the shape basically of a fancy 90 degree pipe fitting it's clamping against. I figure I can either create a 3d spline that follows the centerline of the fitting whereby I could then create a sweep profile that follows that spline or...

I went in and cleaned out all unneeded configurations to the one sub-assembly that giving me problems with my main assembly. Got it to work again.

Ever since installing Autodesk Revit as a trial version last year I have been having an annoying problem whenever I try accessing Alibre's Help from the menu pulldown. Alibre Help does come up but as soon as I click on Alibre Help the Windows installer also pops up wanting to re-install revit...

I have AGAIN muffed up my main assembly where it locks up and won't initialize after opening because I had altered one of my sub-assemblies. Does Alibre have a autosave file structure whereby I can change the saved earlier version file extension back to a ad_asm in an attempt to get an earlier...

I can completely understand having errors pop up if I'm deleting features, but my problem has to do with backing the part up to it's first feature (or to any feature before one that is associated with an assembly constraint) to just change dimension inputs for resizing. I have not had Alibre...

After doing deep uninstall/re-install I now have a problem that I remember having a couple years ago but had gone away due to what I assumed was through a version update. Basically, if I choose to modify a part located in a assembly and do it in another window (probably does it also if I modify...

Alibre Support was quick to respond and sent me a MS Windows link for a Uninstall/Repair check app and a procedure for a registry and file cleanup. Re-installed and now back up and running. I did two uninstall/re-installs earlier in the morning that had no effect. I have another program that...