Search results

I am thoroughly disgusted at this point. I just got off the phone M-Files rep who told me that the standard price for a concurrent license is $1450. Plus I would have to pay to update my current licenses to bring them current. The picture painted by the M-Files support tech that I talked to...

I am having to pay M-Files to update my licensing, and buy a third license for our new employee. M-Files support told me that after the current version of M-Files there will be no support for that Vault, meaning it will not work with any new releases of M-Files. I was told that there is a lot...

Has there been any changes to Hole callout in the last 3 years?

OK, so it turns out that I did have Add-ons enabled; Alibre CAM Alibre Motion Geomagic Translate KeyShot Print 3D TraceParts I have turned off all but the two I actually use regularly, Translate, and KeyShot. I will let you know how this works out.

I have seen this problem for as long as I can remember with Alibre, and now Geomagic Design. I understand that shutting the machine off every night will fix it, but this method seems to ignore the issue that causes it. So, i guess there is no real solution. Also, I have no addons installed...

Will this issue ever be addressed, or did I miss the resolution for it? GD and Alibre for as long as I can remember does not close it session out completely, and holds onto memory. Does anyone else see this happen all the time?

Great! I didn't think of that. I was always trying to open from existing vault.

dammerel, I was told that it is.

That is what I was afraid of. I was hoping for a "Just click this button', answer. ;)

Is there a way to do a save as to a new Vault? We are considering updating our part numbering conventions, and I hoping to find out if this is possible before we start.

Has anyone actually been able to "Chat" with support lately? I have tried several times in the last couple of weeks, but always asked to leave a message. Just wondering.

Thanks for the responses guys. I was afraid of the only one BOM per drawing. I thought I tried the saving the assembly with the configuration that I wanted, but it didn't seem to work. I didn't think that it actually saved the BOM, because I never saved the drawing after inserting the BOM into...

I really have not used BOMs all that much in the past, and now that I am trying to use them more I am having nothing but grief. First, it seems that BOMs are limited to one per drawing, not one per sheet. Is this correct? Second, I have an assembly that has four different configurations in it...

I second that!

Well if the name is the only thing people are complaining about, that is a good thing right? My $.02 worth, I agree the name is not good. When I talk to customers about what modeling software I use, they all pretty much say they have never heard of it. I think I am going to continue using the...

I use it all the time to estimate weights of parts and assemblies. I is pretty accurate.

Hell, I looked into SW 10 years ago before we bought Alibre, and I still get calls and emails!

We started using Alibre in December of '02. I had been using SolidEdge Origin for a couple of years, but it was very limited in what it could do. When they decided to stop offering the Origin package I had to look else where because we couldn't afford to shell out $8000- $10000 for the full...

Thanks, Ralf

Was there a notice sent out about the update? What is addressed in the new update?